Ultimate Force Centrifuge Pressurized 240V
Ultimate Force Centrifuge 240V with Motor / Pump and Variable Frequency Drive.
Don't have space for a gravity supply setup? Don't worry with the Ultimate Force Setup you can set both of the containers on the floor and still use your gravity style centrifuge. With our centrifuge, supply motor/ oberdorfer pump and the variable frequency drive you now can centrifuge without having to place a tote or drum up on a shelf. With the variable frequency drive you can now control the flow to your centrifuge which is important.
The Ultimate Force Centrifuge is specifically engineered to be the most efficient and practical centrifuge available. The bowl is capable of holding 0.5 gallons of oil. The accelerator cone is attached to the lid, insuring that all the dirty input oil reaches the bottom of the bowl. The cone also prevents contaminated oil from splashing out of the bowl guaranteeing that only oil which has been passed and cleaned exits the bowl. The slots on the top of the lid only allow clean oil to escape, trapping all containments and trace amounts of water inside the bowl. This design cleans the oil thoroughly, trapping containments down to 0.5 microns. The longer the oil is in the bowl under centrifugal force the cleaner it will be. Two or more passes may be necessary depending on the amount of containments found in your oil.
Handles a variety of fluids - Water, diesel, WVO, Motor Oil, Biodiesel, ATF, Gear Oil, etc.
- G-Force 1,425
- 0.5 Micron Rating
- Accelerator cone directs oil flow
- Bowl holds 0.5 gal. of oil
- Rated for oil temperature to 400*F
- 1 Yr. Warranty on motor and parts.
240V 1500 Watt Inline Heater
An inline heater placed before the centrifuge will thin the viscocity of the oil allowing the centrifuge to pull more containiments from the oil. The inline heater can heat up to 250℉ or 120℃
Tech Specs
Brand PA Biodiesel Supply G-Force 1,400 Flow Rate 1-30 GPH / 3.8-115 LPH Tempature Rating 400℉ / 205℃ Voltage 240V Motor 1/3 HP Motor RPM 3,450 / 2,850 Unit Height 20" In / 50.8 cm Unit Diameter 23" In / 58.4 cm Housing Width 5.5" In / 14 cm Bowl Width 9.5" In / 24 cm Bowl Depth 3" In / 7.5 cm Oil Feed Fitting 1/2" hose barb reduced to 1/4" inlet Clean Drain Hose 3/4" In Hose Barb Contaminated Drain Hose 1/2" In Hose Barb